6 Tips for Using a Blender Correctly

Tips for Using a Blender

We bought our new blender. Whether it is portable, immersion, classic, professional, or mixer, it doesn't matter.
Before taking action, we must take into account that, like any electronic device, it needs attention in use and care.
It is for this reason that there are simple rules and norms, if you prefer to call them, "steps" to follow.
Let's find out the various steps together.

1. Make sure the blender is in the right condition

The first step concerns the generic control of the device. This obviously has to be plugged into work, the wire has to be untangled well, and the jug has to be well cleaned so as not to contaminate the food.

Another small precaution you will have to take towards the cable: make sure that it is not in contact with water once it is plugged into the socket. It may be dangerous.

2. Enter the ingredients

This depends on the type of blender you are using. There are mixers that blend harder things without having introduced the liquid first. At the same time, there are classic blenders that need to blend pre-shredded pieces with a little sauce or semi-liquid substances. The first is capable of crushing even ice, while the second, if not equipped with high power and special functions, cannot do so. This is why what we will cook will depend on the blender, but anyway, the second move is to insert the large or small pieces into the blender and close the lid (if there is one).

If you want to crush ice, we advise you to add a little water inside so as to facilitate the work of the blades and to prevent it from melting simply.

3. Close the lid and hold it firmly

For blenders with a lid, the third step is to close it in the right direction and to keep it firmly. If you need to add a few ingredients at a time, these lids have smaller caps in the center that can be removed and put on as needed. Close the lid tightly. However, in addition to avoiding splashing food everywhere, it also has the important function of activating the blender. In fact, in blenders equipped with an interlock system, processing does not start until the lid is perfectly sealed.

4. Blend

Whether it's analog or touch, all blenders have a control panel or at least a knob or two to turn to define power and speed. Try them out before you start. Experiment and find the right functions to get your compound. Usually, just turn to the right to increase the speed.

Blend, mince and mix until the mixture reaches the consistency you want. If not, stop the process, stir a little with a spatula and restart. Sometimes you may also need to add a little liquid sauce or a little cooking water.

5. Open and pour the contents

Once you have really reached the desired consistency, you are ready. Your preparation is done. Open the lid and pour your cream into a separate bowl. Once you have cleaned the whole jug with the help of a spatula, you may also need to remove the blades to clean it thoroughly.

6. Clean the blender

Once all the cream has been cleaned from the jug, the last step concerns the real cleaning of the device. First, make sure you know your blender and whether or not it can be placed inside the dishwasher.

If it cannot be put, wash the blender in two different stages

  • Wash the carafe first. It will take you a quick minute to wash the inside of the container. You will need to fill it with hot water, adding a drop of white vinegar and a little dish soap. Run the device for a few minutes at medium speed and then, after removing the blades, rinse them together with the jug and let them dry.
  • Wash the base. If this is plastic, you can choose to use a cloth moistened with soap or a kitchen cleaner spray or use a cloth moistened with a solution of water and baking soda.

If this is made of stainless steel, just use a glass cleaner, spray it on the surface and wipe it off with a soft cloth.

Remember, it is essential to avoid leaving your blender for too long in contact with water. Neither the electric cable nor the base is waterproof. But on the contrary, they could break or burn. Then, wait at least an hour before using the blender again.

If the blender is dishwasher safe

If you have purchased the latest generation blender, then you will have the possibility to wash its components in the dishwasher. You can insert glass, blades, and other accessories if you have them supplied.

What you cannot wash in this way will obviously be the base. In this case, just follow the guidelines set out in the first point, and that's it. Your blender will return to shine brighter than before.

4 simple ways to clean your hand blender

  • Immerse the device in boiling water and vinegar and blend
  • Leave the rod in the water and bicarbonate
  • Wipe with a damp cloth
  • Use a toothbrush with some dish soap

Recommended related articles below:

Blenders for Dry Fruits

Blender for Dry Fruits: Tips for Use

10 Best Blenders for Smoothies Reviewed

Best Blenders for Smoothies, Reviews of the Best Models and Selection Guide

What Can I Blend with Blender

What to Blend with the Blender?